Pure Water Car Wash Water Filter Di Pressure Vessel

The car wash perfect solution includes a pure water filter that leaves a shiny, streak-free finish every time with little effort. Our Di Pressure Vessel water filter is the answer.  You may never hand dry your car again!


Buy On EV Accessories


11.7 Litre Resin Vessel Full of DI ResinAre you tired of washing your car only to have it dotted with water spots which can only be removed through polishing? At Motoring Deals we have the perfect solution that leaves a shiny, spot-free finish to your car every time with little effort. Our Pure Water Di Pressure Vessel water filter is the answer. Part of a perfect car cleaning solution, the Di Vessel filtration system removes dissolved particulates from the water leaving the water free from contaminates, meaning you can leave your car to dry naturally

Approved by ceramic coating specialist PP Protect, this pure water car wash filter is the perfect solution of achieving a spot free, smear free finish.

The Di pressure vessel has a capacity of 11 or 16.7 litres, and used in conjunction with included Di resin can produce top quality water which is suitable for any pure water application, including pole window cleaning, aquatics, drinking water, car valeting, gardening and hydroponics as well as fish keeping.

Clunk click hose fittings are included and this resin vessel is supplied full of MB-115 for normal water or MB-151 Di Resin for hard water areas by selecting the checkbox above.

This is a CE approved, brand new resin vessel; it has not been recycled or reclaimed. Our low prices are because we source direct from a UK based distributor, not a re seller. This product is guaranteed to provide quality service to you, and if you look after this vessel, it can last you a life time. (we supply these direct from the supplier).

DI Pressure Vessel Water Filter Features:

  • 11 litre capacity Di Pressure Vessel.
  • Includes stand (built in base)
  • Clunk click hose fittings included. (Hose Connectors are required)
  • Complete Di vessel, all parts included and assembled, (riser pipe, resin head, and internal parts).
  • Complies with all requirements of P.E.D. 97/23/EC directive.
  • Suitable for drinking water following KTW recommendations.
  • DI Vessel may come in Black or Blue depending on stock

Di Pressure Vessel Operating Specifications:

  • Maximum pressure: 10.5 bar (150 psi)
  • Maximum temperature: 49 °C (120 °F)
  • Minimum temperature 1 °C (34 °F)
  • Maximum vacuum: 127 mm Hg (5" Hg)
  • Vessel approved for water filtration use only
  • Vessel must not be exposed to temperature below -29 °C (-20 °F)

Simply wash your car as normal and then plug in the one of our pure water var wash water filters into your hose and rinse down the car with pure water! There’s even no need to dry after if you don’t want to as you leave no minerals or impurities on the vehicle! (always rinse 100% of the car shampoo off for best results).

Create pure water for you car cleaning with the a Motoring Deals pure water car wash water filter for the final rinse (as low as 0PPM), and leave a perfect spotless finish. You can test the water with a TDS meter also available from our shop. We supplier the filter in two versions to best suite your water area.

Motoring Deals pure water car wash water filters are approved by PP Protect vehicle ceramic coating specialists.

Pure Water Di Pressure Vessel Water Filter Care Instructions.

If stored in a cold place be sure to drain and empty the pressure vessel to prevent frost damage. The resin will remain wet for some time after use.  We recommend that you drain excess was off if storing without use for more than one month. Do not shake and always store upright to avoid disturbing the resin bed. For refills click here

You will need two Hozelock type connectors and a ideally a brand new length of hose for the "out" side of the filter.  They can also be purchased via our shop.

Additional information

Weight 25.00 kg
Vessel Size

11 Litre, 16.7 Litre

Select Resin Type

Standard MB-115 Resin, Hard Water MB-151 DI resin


Blue, Black


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…